transformer evacuation/ transformer drying/ vacuum pump set

transformer evacuation/ transformer drying/ vacuum pump set vacuuming process in the production, installation and maintenance

Application:

ZKCC series vacuum pumping device is a new type of vacuuming equipment developed and produced by our company. It is widely used in the process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower than any other products in the same field.Application:

It is widely used in the vacuuming process in the production, installation and maintenance of many electric power equipments, like electric power transformer, capacitor etc., and is also used in the technical process of industrial production, such as vacuum drying, vacuum distillation, vacuum wielding, vacuum coating etc.It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.Characteristics:

1.       The machine adopts special Roots pump and vacuum pump, so the vacuum pumping speed and pressure, are obviously better than any other devices.

2.       Working vacuum range and maximum vacuum degree are superior to other products.

3.       It is installed with special vacuum gauge for accurate indication.

4.       It adopts automatic vacuum relay for automatic control.

5.       Stable and reliable operation, low noise, and easy to move.

 

Technical Parameter

Technical Parameter	ZKCC-30	ZKCC-70	ZKCC-150	ZKCC-300	ZKCC-600	ZKCC-1200
Gas Pumping Speed (L/s)	30	70	150	300	600	1200
Vacuum Limit (Mpa)	5	5	3	3	2	2
Working Vacuum (Mpa)	130	125	110	105	100	80
Total Electric Power (kw)	1.65	2.6	5.2	9.5	10.7	20.5
Main Pump Type	ZL-30	ZL-70	ZL-150	ZL-300	ZL-600	ZL-1200
Front Stage Pump Type	2X-8	2X-15	2X-30	2X-70	KT-300	KT-500
Wire size of power supply input ≥(mm2)	1	1.5	3	4	6	8
Power Supply	50Hz 380V (3phase, 4wire)
Gas Inlet Caliber (mm)	DN50	DN80	DN100	DN160	DN200	DN250
Gas Outlet Caliber (mm)	DN34	DN60	DN70	DN90	DN70	DN90
Overall Dimensions (cm)	73×46×100	79×55×120	105×60×135	132×78×150	145×86×201	168×100×269

(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine, oil tester, oil analyzer, testing equipment)

Our oil filtration machine:

Series ZY Single-Stage Vacuum Transformer Oil Purifier

Series ZYD Double High Vacuum Transformer Oil Purifier

Series ZYB Multiply-Function insulating oil treatment machine

Series TY Turbine Oil Purification Apparatus

Series TYA Lubricating oil/ hydraulic oil purification unit

Series TYB Portable light Fuel oil purification machine

Series TYD Vacuum dehydrator

Series TYF Phosphate ester fire-resistance oil purifier

Series PL Plate pressure oil purifier

Series TYD Vacuum dehydrator

Series EFD Explosion protection filtration machine

Series BAM Press filtration system

Series ZKCC Vacuum pumping device

Series COP Cooking oil purification machine

Series CYS Centrifugal oil purification machine

Series JL Portable oil filtering and oiling machine

Our oil tester/ analyzer:

Series IIJ-II Dielectric oil breakdown strength tester

Series TP-3A Water content tester/ moisture sensor

Series TPV-8 Viscosity analyzer

Series TPC-2100 Flash point analyzer (close cup)

Series TPO-2100 Flash point analyzer (open cup)

Series CL-3 Interfacial tension analyzer

transformer evacuation/ transformer drying/ vacuum pump set