Vacuum pumping device

Vacuum pumping device process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower tha

ZKCC series vacuum pumping device is a new type of vacuuming equipment developed and produced by our company. It is widely used in the process of producing vacuum condition for various equipment. Its vacuum pressure can reach much lower than any other products in the same field.Application:

It is widely used in the vacuuming process in the production, installation and maintenance of many electric power equipments, like electric power transformer, capacitor etc., and is also used in the technical process of industrial production, such as vacuum drying, vacuum distillation, vacuum wielding, vacuum coating etc.It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.Characteristics:

1.       The machine adopts special Roots pump and vacuum pump, so the vacuum pumping speed and pressure, are obviously better than any other devices.

2.       Working vacuum range and maximum vacuum degree are superior to other products.

3.       It is installed with special vacuum gauge for accurate indication.

4.       It adopts automatic vacuum relay for automatic control.

5.       Stable and reliable operation, low noise, and easy to move.

Product Type and Main Technical Parameter

Technical Parameter	ZKCC-30	ZKCC-70	ZKCC-150	ZKCC-300	ZKCC-600	ZKCC-1200
Gas Pumping Speed (L/s)	30	70	150	300	600	1200
Vacuum Limit (Mpa)	5	5	3	3	2	2
Working Vacuum (Mpa)	130	125	110	105	100	80
Total Electric Power (kw)	1.65	2.6	5.2	9.5	10.7	20.5
Main Pump Type	ZL-30	ZL-70	ZL-150	ZL-300	ZL-600	ZL-1200
Front Stage Pump Type	2X-8	2X-15	2X-30	2X-70	KT-300	KT-500
Wire size of power supply input ≥(mm2)	1	1.5	3	4	6	8
Power Supply	50Hz 380V (3phase, 4wire)
Gas Inlet Caliber (mm)	DN50	DN80	DN100	DN160	DN200	DN250
Gas Outlet Caliber (mm)	DN34	DN60	DN70	DN90	DN70	DN90
Overall Dimensions (cm)	73×46×100	79×55×120	105×60×135	132×78×150	145×86×201	168×100×269

Notice: Due to different types and components of product, the technical data may vary slightly.

 

 

(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine, oil tester, oil analyzer, testing equipment)   Our oil filtration machine:   Series ZY Single-Stage Vacuum Transformer Oil Purifier Series ZYD Double High Vacuum Transformer Oil Purifier Series ZYB Multiply-Function insulating oil treatment machine Series TY Turbine Oil Purification ApparatusSeries TYA Lubricating oil/ hydraulic oil purification unit Series TYB Portable light Fuel oil purification machine Series TYD Vacuum dehydrator Series TYF Phosphate ester fire-resistance oil purifier Series PL Plate pressure oil purifier Series TYD Vacuum dehydrator Series EFD Explosion protection filtration machine Series BAM Press filtration system Series ZKCC Vacuum pumping device Series COP Cooking oil purification machine Series CYS Centrifugal oil purification machine Series JL Portable oil filtering and oiling machine   Our oil tester/ analyzer: Series IIJ-II Insulating oil breakdown strength tester(oil BDV tester)

 

Series HTJS-H Insulating oil dielectric tester (dielectric loss tester for insulating oil)

 

Series HTJS-V Tan-Delta Tester (anti-jamming dielectric loss tester for HV electrical equipment)Series TP-3A Water content tester/ moisture sensor Series TPV-8 Viscosity analyzer Series TPC-2100 Flash point analyzer (close cup) Series TPO-2100 Flash point analyzer (open cup) Series CL-3 Interfacial tension analyzer

 

 

Vacuum pumping device